General Maintenance / Facilities Requests
The University has a professional staff of technicians, painters, plumbers, carpenters,
and electricians that work to preserve the integrity of the residential environment.
USA Housing Facilities staff is available 24/7.
To Report Facilities Concerns
To report routine (non-emergency) facility / maintenance concerns, contact the Housing Facilities Office at email@example.com or (251) 460-7655, M-F, 8 AM – 5 PM (CST).
FOR AFTER-HOURS EMERGENCIES: Please contact your Community Office to speak with the RA On-Duty. The RA On-Duty
will be able to access the Housing Facilities staff member on-call for you. The following
items are considered emergencies:
- Doors that do not lock, unlock or secure properly
- Lost key or a key stuck inside of the door
- Loss of heat, air conditioning, or water
- Clogged drain, sink, or toilet
- Broken window
- Equipment fire
PTAC Units (Air Conditioning) in Azalea Hall & Stokes Hall
Each room's PTAC (A/C) unit is controlled by overall building software. The software
determines the range that each room's temperature is allowed to fluctuate in order
to maintain the best overall building humidity and prevent mold. Each room's thermostat (on the wall near entrance) will allow you to adjust your temperature
within the 69-76 degree range.
A motion detection feature is built-in to the building's software that will detect
when a room has been vacant longer than 1 hour. After one hour without motion, an
individual room will revert to energy saving mode and will auto-adjust the room's
temperature setting allowing it to increase no higher than 75 degrees.
Upon returning to the room from an extended absence, students may notice it feels
warmer than their pre-set temperature. However, the motion sensor will register their
presence and automatically begin lowering the temperature to their previous setting
within a short time. Don't worry, the motion sensor is sensitive enough to detect small movements while
sleeping to prevent it from shutting off throughout the night.
If students feel it is excessively hot in their room, please report this to a housing
staff member by calling your RA On-Duty. We can look at the temperature history of the room through the building software
system to determine if there is indeed a problem or if it has just been in resting
mode (at 75 degrees).
PLEASE NOTE: If the student places the PTAC unit in the "Auto" setting and the room's temperature
reaches 68 degrees, the unit will adjust itself to heat. However if the student places
the PTAC unit in the "On" setting, the unit will continue to blow cool or warm air
(whichever the unit is set to).